Have a 2015 24BHS that I need to figure out a railing system for the bunk beds. I have small children one being a fearless boy that will fall out of the bunk. Has anyone made or found a railing system that will work?
Thanks for the help.
I used a bed rail that was available at Walmart.
Similar style to this one:
I then attached the anchor plate as far to the opposite side of the bed and then used addition nylon webbing screwed down across the (about 3" from the ends of rail legs and the bed to fully secure and keep from tipping out. However, It is still quick and easy to remove, if necessary, by lifting the outside rail up over the bunk frame and sliding out from under the added webbing and disconnecting the anchor plate clip. The way it is anchored it cannot come out on its own.
The additional webbing was ran the entire length of the bunk and screwed down to the solid wood cross pieces hiding inside the bunk. If you have 1/2" OSB then you can use screws about every 6 -12 inches for the length of the bunk.