3850 Rear jacks

[timsitis]

I noticed today while moving my hauler that the electric jacks at the rear were not working. Took the switch out thinking maybe a short or disconnect in the wiring but found nothing amiss. Did the old hammer tap on the motor...nada......Works well in manual with the crank. Any thoughts by anyone?

 

[TandT]

Did you check for a disfunctional fuse? If you have access to a volt/ohm meter, you could check at the back of the switch to see if you are getting 12 volts.

 

[noobee]

If the motor is working but the shaft doesn't move, you probably broke the shear pin. Easy fix to replace the pin.

CS