The 4 inch waste pipe from the toilet in my Sundance has a slow leak at the elbow. It would appear that insufficient glue was used to make the seal when initially connected. I thought perhaps a little glue could be inserted with a syringe as there appears to be a small gap where the glue is missing, but plumbers I have spoken to say this cannot be done and the only way to fix it, is to cut out and replace with new fittings.
Would you have any other suggestions that might work, i.e. silcon caulk or tape ?
Would you have any other suggestions that might work, i.e. silcon caulk or tape ?