LED bulb swap, current super duty

[mmomega]

I changed out the interior lights in the truck in favor of some cool white LED bulbs, I found a few websites offering 'kits' but for $50-70 it wasn't worth it.

My truck is a crewcab and has a dome light above the rear seat, 3 bulbs and an overhead console up front with 2 map lights.

 

[boatto5er]

Where did you get your bulbs JD?

 

[mmomega]

Superbrightleds.com

2 - Cool White #194 / T10 Wedge bulbs http://www.superbrightleds.com/cgi-bin/store/index.cgi?action=DispPage&Page2Disp=%2Fspecs%2FWLED-xHP15-TAC.htm
3 - Cool White #578 Festoon Bulbs http://www.superbrightleds.com/cgi-...DispPage&Page2Disp=/specs/festoon_4410-x9.htm

The fronts are a bit brighter than the rears but for now I like it like that, now the rears aren't dim by any means but they put out enough to see well. Any 44x10mm Festoon bulbs should work.

It was $29 I believe for all 5, where as GoRecon and some other sites wanted $50+ for 3 bulbs.

 

[boatto5er]

Thanks!

 

[mmomega]

No problem.

I also added some chicken lights.

Drilled in to the pinch weld just under the cab, x5 lights per side and tapped in to the amber fender lights. They light up the running boards great too.

Also got them from superbrightleds.com

The M11 truck series http://www.superbrightleds.com/cgi-...pPage&category=TRUCK&Page2Disp=/specs/m11.htm

 

[boatto5er]

Now these I am definitely going to do. Had something similar on the 2008 F250, but it had the King Ranch running boards so I used a light strip tied into the parking lights. These will work great with the Lariat running boards. Thanks again!