Can anyone help with satilite to the bedroom? I have a cyclone 370c with dish network all hooked up and I can watch tv in the main area but can not get nothing to the bedroom at all. Along the side wall were your main tv is has 2 cable outlets and I ran a cable cord to the main tv and tried both outlets and still can't tv to my bedroom. I have not tired hooking up a tv in the back part of the garage area, but I bet money on it that it won't work back there or were ever else ya can plug a tv into.
I'm not clear on how you're trying to get the satellite signal to the 2nd TV. Normally you would need a 2nd satellite receiver at the 2nd TV. Assuming your dish supports 2 coax connections, on most trailers, you would connect the 2 COAX lines to the living room and bedroom connectors in the UDC (but I don't know how your Cyclone is wired for satellite). Or you could run the 2nd COAX line from the dish through a window or other opening to get to the 2nd receiver.
If you're trying to run a TV output through your internal COAX wiring, into the bedroom TV, I don't know if anyone has got that working. Many TVs won't have video outputs.
If your living room satellite receiver has a COAX output to the TV, you might be able to take a splitter and run one output to the living room TV, and the other through the internal Satellite COAX wiring to the 2nd TV (if your trailer has that wiring). If you try to use the Cable/Antenna COAX line, the booster and splitters will probably not pass the satellite signal. You might be able to use splitters to bypass the booster, but that might take you deeper than you're ready to go.