Frigidaire loss of power shore and battery.
I have a dead outlet to the Frigidaire refrigerator also. I have plugged the refrigerator into an extension cord and it works fine. Even from the receptacle on the Xantrex. My configuration is different in this Big Horn 3570RS, the invertor is a XANTREX PRO 1000. the GFCI is not tripped on the invertor. Power is being applied to the output wiring. I have verified that the 110 circuit breaker marked Refrigerator does in fact operate the circuit that powers the Xantrex invertor. From researching the Xantrex site I determined that the transfer switch is internal to the invertor. The invertor output ac is present both in shore power and battery mode indicating the invertor is working properly. The connected wires from the output of the Xantrex cannot be identified at any location in the trailer. Cant find my circuit toner to search more thoroughly. Where is the wire from the output of the invertor routed to the outlet under the counter that the refer plugs into? It appears to go along inside the frame to the refrigerator/stove slide junction box. If there is a GFCI between the invertor output and the refrigerator outlet where would it be?