Wheel caps & removal

[bd2dabone]

So just how do you take these wheel caps off. I pryed gently on the center which appeared to be a point of removal however it didnt release. Before i get the bigger hammer out, clue me in on how to get the cap off to inspect inside the cap.

 

[Invizatu]

Keep doing what your doing... carefully and it should pop off. Or you could take the wheel off and slip the entire unit out the back. I removed mine and they sit in the garage collecting dust and other stuff. I like being able to touch the hub when traveling. They are strictly cosmetic, they do look good.

 

[TedS]

I took a 1" putty knife, slipped it in the joint and tapped it into the joint. Do that in a couple places around the cap. The cap will pop out. Mine are plastic. Be careful with yours.

 

[westxsrt10]

The 2" center of the hub cover can be removed by prying with 2 properly sized screwdrivers. The 3 1/2" larger hub cover can be removed by removing the wheel/ lugs.