jjmorri999
Member
We have had our BC for a little less than two years. We are currently at home preparing for a 4 week road trip. We have had to put all 4 slides out and retract them several times. We had a fully charged 12V battery and were hooked up to 15 amp shore power. Yesterday we were working on organizing things. The three slides that operate using hydraulics worked fine. The kitchen slide, which is all electrical, went out part way and stopped. The lights dimmed and there was a click from the battery compartment. I was able to retract the slide using the switch. Since then I have not been able to get anything from the slide. When I try to put it out, I get the click and dimming lights. I even changed the battery to a freshly charged 12V and disconnected and reconnected the shore power. The lights do come back up after the click but the slide does nothing. It seems that this slide is on an auto reset fuse. The question I have, does this seem to be a fuse issue or a low power issue? I have looked through the forums for something similar but haven't found anything (I may have missed it). Any help would be appreciated.