I needed to replace the fireplace heater core and fan assembly so I removed the wood trim and then the four screws, one in each corner of the metal frame.
The factory apparently screwed the top from above also. As I pulled on the bottom, it begins to slide out but the top has three screws which were put in from the top through wood and the metal frame, before the desk top was installed. How can I remove the desk top to get at the screws from the top? Any other suggestions would be appreciated.
Bill
The factory apparently screwed the top from above also. As I pulled on the bottom, it begins to slide out but the top has three screws which were put in from the top through wood and the metal frame, before the desk top was installed. How can I remove the desk top to get at the screws from the top? Any other suggestions would be appreciated.
Bill