JawBreaker
Member
I have a 2012 Road Warrior 305 RW, just picked it up last Friday, I am pumped but I cannot find an opening from any angle to the by-pass valves on my water heater, am I missing something? I need to gain access to those valves in order to fill my tank and turn on the device?
I'm in panic mode at this point, I looked again, the only way into the back of the water heater is to remove a wall in the basement compartment, I hate to do this to a brand new camper. Anyone out there got another solution? Why would this be designed this way, is it an oversite? Please advise soon, getting ready to pull-out for the first trip Wednesday! Thanks everyone, hopefully someone knows a hidden opening to get into that area?
Well, I removed the wall, found the valves, got everything filled, fired-up and took off. Made our first trip out in good time, got 13 mpg. Should be a nice long weekend once this rain stops.
I'm in panic mode at this point, I looked again, the only way into the back of the water heater is to remove a wall in the basement compartment, I hate to do this to a brand new camper. Anyone out there got another solution? Why would this be designed this way, is it an oversite? Please advise soon, getting ready to pull-out for the first trip Wednesday! Thanks everyone, hopefully someone knows a hidden opening to get into that area?
Well, I removed the wall, found the valves, got everything filled, fired-up and took off. Made our first trip out in good time, got 13 mpg. Should be a nice long weekend once this rain stops.
Last edited: