Short-Bed-Dually
Active Member
I am in the process of installing a wired rear backup camera. When I pulled down the coroplast behind the RH wheels hydraulic fluid poured out. The dinette slide hydraulic cylinder in mounted in this area. I attached pictures of this area. The piston seal appears to have been leaking for a while, but this seems like a lot of fluid. The interesting thing is the fluid is in between the coroplast and the foil barrier more than on top of the foil barrier. I don't see where any lines are leaking. Has anyone else had this problem? Are these cylinders rebuildable or just need to replace?
Attachments
-
IMG_20210403_180124223.jpg709.9 KB · Views: 48
-
IMG_20210403_180119584.jpg467.7 KB · Views: 47
-
IMG_20210403_175711043.jpg278.7 KB · Views: 47
-
IMG_20210403_175647890.jpg390.7 KB · Views: 47
-
IMG_20210403_175625179.jpg279 KB · Views: 40
-
IMG_20210403_175623686.jpg302.6 KB · Views: 38
-
IMG_20210403_175616729.jpg390.7 KB · Views: 40
-
IMG_20210403_175001720.jpg520.9 KB · Views: 41
-
IMG_20210403_174959398.jpg414.5 KB · Views: 38
-
IMG_20210403_174941124.jpg364.5 KB · Views: 38