I have to repeat: this is the full 6-point level up system. the front jacks on mine are the ones they use in the front. Thee front will be integrated into four more installed: two in front of the axles and two some distance behind the axles. It will have full auto leveling, I can raise evenly to clear the tires off the ground, and I can change a flat on the road by lifting side off the ground. Folks, this is the full up syst. Those of you with round jacks, Lippert front hydraulics have much of the syst already installed. The factory isn't giving deals and I'm not sure they even calculated I already had their hydraulics. They quoted me $4,900.00 install in Indiana. Of course, I knew they were out of the ball park. I found this to be true in many other transactions. I guess, we'll see what I get, but the quote I received is for Lippert 6-Point Level as I indicated. Ads I figure, 8 to 10 hours labor, $100/hr places cost of syst at $2,000 for 4 cylinders, plumbing, 2nd hydraulic tank, some solenoids, and a controller. Ron