robnmo
Well-known member
Hopefully the pictures come out, but have a question on the slide seals. When the wardrobe slide retracts the screw heads on the top trim piece hits the seal and fold it back inward, (which I don't see as a problem) but when we extend the slide the seal doesn't fully fold all the way out at the top. I am assuming this could cause rain water to leak in behind the seal when it's extended if it's not properly laying outward and flat. I thought about putting some type of thin piece of plastic over the screw heads but figured I'd ask here first to see if there's something else or even if this is an issue. The large living room slide doesn't do this, it's only the smaller wardrobe slide. The 1st pic is the correct seal position that I unfolded the seal to lay properly, the 2nd and 3rd pics are what it normally looks like. Thanks
Attachments
Last edited: