So,...I finally got around to de-winterizing the 5'ver today and noticed a couple of issues.
1 - I filled the fresh water tank with about 20 gallons of water and tried to turn the pump on to clear the lines of antifreeze,..Nothing. (I was able to clear the lines of antifreeze using the city water "valve", but was not able to fill the hot water heater???)
2 - The Yeti package will not turn on either.
3- Battery does not seem to be charging (According to the lie-o-meter anyway)
All other functions work properly. I took down the basement wall to see if the 3 fuses that blew in the spring were once again blown,..they are fine.
I reset the reset button on the power bar in the front compartment by the hydraulic pump...still nothing.
There are no error codes on my EMS and L-1 and L-2 are both operating at 115-117.
I am a total newbie to these big units,...so any help is much appreciated.
Cheers,..Kris
1 - I filled the fresh water tank with about 20 gallons of water and tried to turn the pump on to clear the lines of antifreeze,..Nothing. (I was able to clear the lines of antifreeze using the city water "valve", but was not able to fill the hot water heater???)
2 - The Yeti package will not turn on either.
3- Battery does not seem to be charging (According to the lie-o-meter anyway)
All other functions work properly. I took down the basement wall to see if the 3 fuses that blew in the spring were once again blown,..they are fine.
I reset the reset button on the power bar in the front compartment by the hydraulic pump...still nothing.
There are no error codes on my EMS and L-1 and L-2 are both operating at 115-117.
I am a total newbie to these big units,...so any help is much appreciated.
Cheers,..Kris