We are also headed to Alaska this year starting out from Florida on June 1st and our only reservation so far is Denali NP for 5 nights of dry camping. We will be passing through Dawson City on the way up. We are traveling light this trip leaving our Bighorn on the side of the house. We bought a...
I would disconnect the batteries and check you wiring, looks like you have a glowing red nut. Are you sure you connected the wires right? You also say that’s a ground bar in your picture, I would question if that was a ground bar.
We switched from Direct TV to Dish a year ago and there is a major improvement in the picture. We have one of the original Carryouts so we were able to switch to Dish just by changing some DIP switches. The dish is mounted on the back ladder so we can move it to get clear sky. We average moving...
That Curt hitch is rated at 500 lbs. The hitch kit comes with its own brackets that has nothing to do with the Lippert from the factory brackets. The hitch can be bolted or welded on. I carried an electric wheel chair 5,000 miles with no problem from the hitch, but the chair platform was not...
I installed the same receiver last year. While in Goshen last summer I took the cross member off and had two additional 2” sockets welded on. Three 2” sockets really stabilizes the lot.
Will, did you leave the Lippert hitch brackets on, it’s hard to tell from the picture. I left the Lippert...
I had the same problem with my 2016 and it looked good during the PDI, but it started to tear as the wall was brought in and out. If you measure the wall spacing on all four corners you will probably find that the one corner is closer then the rest. My measurement for the close corner on mine...
I re-keyed the outside cabinet locks @ $18 each. I dropped the four locks off at a local locksmith and they were done in one day and are keyed the same.
Bighorn full body paint is back. I talked to Tom Montague at the Tampa Show and he said that you can again order a Bighorn with full body paint and the brochures are printed with the full body paint option of black/red or black/tan. This is great news, thanks Heartland, thanks Tom.
Dave,
Doug and Mary Sloan have signed up for the Rally. We will be in the site #164. We are arriving late on Monday the 16th and leaving on Monday the 23rd. We are looking forward to the rally.
You might try replacing the start capacitor. I believe units have two, one for compressor and one for fan. As for low Freon, there is no recharging the unit although some people have modified them.
Hitch rails were installed as per instructions with all nuts, bolts and washers included with the hitch. I believe miles of towing loosened them. I check wheel lugs often, I’m now adding hitch bolts to that list. Post was for FYI.
I just came back from the body shop where my truck is in for repairs from a blow out. The body shop had to take the bed off and they informed me that two bolts holding the hitch rails on were only hand tight. I normally go under the truck to check the bolts once a year and I was surprised to...
On our 2011 Grand Canyon, we just put the chair in the full recline position, turned it sideways, and it went right thru the door. Backs also come off to lighten the load, but more work that way.
He has tried the vertical adjustment bolt. I even suggested to lower the bolt hoping it would increase the interior angle up from the new floor. I compared my floor, same model, I have an
angle increase, he says he has an angle decrease. I’ll text your reply.
I am posting this for Dennych1 who is out camping with limited internet. He has a 2014 BH 3160 EL. He installed Shaw vinyl planking last week and now the curb side floor, which drops down to level interior floor, is rubbing when the wall is brought in. He tried calling HL without getting an...
Liz, I made a top of slide sweeper some twelve years ago out of 1” PVC pipe attached to a mop head. The best way to describe it is it looks like an upside down J. The sweeper unscrews into 3 pieces. I also sometimes put towels at the inside corners of the slide on really heavy rains.
Gus, from the picture of the ruler, it looked to me like I there was a 3/8 difference in the two pictures. If they are both the same distance coming out then you should be fine. Next check for a good seal
when fully open and closed.
As for maxed out, I’m not sure I understand. Just check and...
This was my first summer of towing with disc brakes and I can not say enough good things about them. I towed in the rockies this summer with a lot of confidence.
"it was indeed a pin that I replaced with a grade 8 screw and a lock nut"
Gus, I would be a little concerned with using a grade I bolt. That shear pin is there to break if there is a problem, maybe someone else can chime in on proper grade bolt. As for you measurements on the wall, it looks...
The window I added behind the docking station in the basement wall was sized to a clear piece of plastic I bought from Lowe’s. I routed out the 1X2” wood so the plastic can slide open. I used a rubber bumper for a knob. The window allows me to check plumbing without taking the wall down.
I have the same unit and same problem, only ours wasn't detected unit bottom was almost all the way in. Many of my slide mechanism parts are bend. I have an appointment to determine cause and fix on October 2nd. My slide does close all the way on the rear edge of the slide. I have been using the...
I have modified the basement wall. I just screw some 1X2 board into the basement floor and ceiling to hold the wall in place. The fabric on the wall can be purchased from a store like Joanne Fabrics. The space gained is big enough to hold a 6 gallon pancake air compressor and some small too...
If it winds up being the shear pin, you will have to time the wall to get sides to coming correctly. I had my shear pin break on a SOB and it took several attempts to get it timed correctly. Also, replace it with the same grade bolt because it is meant to break if there is a problem.
Try looking for a broken shear pin (nut and bolt) on a square shaft over rod. You can check it out by having someone hit the switch and see if the gear on side not coming in is turning. Good luck.
Mine on the back wall are 1076. I could not find it in the auto parts store, but I found it in a campground store under the Camco name. I'm sure RV stores carry them.
I agree with Ricky and Cinder. Next time around we would require Full Body paint and we would not want to give up the options which you can not get in the Landmark like a use able under 36 foot RV and a propane/electric refrigerator.
We are in a local campground now and yesterday we gave a...
Installed LED strip lights over drawers and counter at foot of bed. I used the every low light switch for the over head lights that I moved to bedroom door knob. This gives use just enough light for a dark place.
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.