NewCyclone
Active Member
Now living in my camper while moving to DC for the military. Prior to this we had issues with the front landing gear legs barely moving and the hot water heater not heating the water. Dealer said it was the "neutral switch" on the converter or inverter (don't remember which, but had something to do with 12v power and shore power.
We took the camper home and with new battery installed the landing legs still did not work correctly. I took the camper to a new dealer and they ended up replacing the landing leg motor. They work great now. However, now that we are living in the camper for the next two months, we have found that the water heater still does not heat the water when using electricity (we are switched to gas for now), the fridge is cold, but takes a longtime to freeze ice, and if I shut down shore power the battery is showing not fully charged.
Not sure if these are related or not, but it is leading me to believe that something happened to my converter/inverter when they "repaired it".
Any advice would be greatly appreciated.
I have a 2008 Heartland Cyclone 3795 with a Progressive Dynamics 9200 series converter.
We took the camper home and with new battery installed the landing legs still did not work correctly. I took the camper to a new dealer and they ended up replacing the landing leg motor. They work great now. However, now that we are living in the camper for the next two months, we have found that the water heater still does not heat the water when using electricity (we are switched to gas for now), the fridge is cold, but takes a longtime to freeze ice, and if I shut down shore power the battery is showing not fully charged.
Not sure if these are related or not, but it is leading me to believe that something happened to my converter/inverter when they "repaired it".
Any advice would be greatly appreciated.
I have a 2008 Heartland Cyclone 3795 with a Progressive Dynamics 9200 series converter.