SilverRhino
Well-known member
While investigating a wet storage compartment on our last trip.......I discovered that a line coming from the "Winterizing Valve" was not connected to anything! I also discovered that one side of the "tee" had nothing connected to it!
The way my BC is currently plumbed.....I see no way that the pump will pick up the anti freeze and push it through the plumbing. I would assume that all the UDC are plumbed the same.......so I figured I would receive the quickest response on this forum instead of Ask the Factory.
Hopefully the attached photos show my dilemma.
The way my BC is currently plumbed.....I see no way that the pump will pick up the anti freeze and push it through the plumbing. I would assume that all the UDC are plumbed the same.......so I figured I would receive the quickest response on this forum instead of Ask the Factory.
Hopefully the attached photos show my dilemma.