Search results

2011 Heartland Edge TT M18.fridge is a Dometic RM8551.Very nice large fridge.Probably won't use it very much on 12volt but nice to have.all electronic controls,removeable freezer section to make it into a large all fridge option.Not a bar fridge size on the floor.

Thanks for the education my thinking is still old school open or closed circuit,no grey.lol.Will be checking it out.

I am going out to the storage site today with a multimeter.The fridge is a 3 way fridge and has a 12 volt setting and a 12 volt heater element I presume so that could account for the 20 amp. fuse??Maybe the fused 12 volt circuit is only for the 12 volt element and the electronics is on another...

I have a WFC 8955PEC converter in a new to me 2011 Edge M18 that has a neon light on all the time for the fridge circuit.I have changed the 20 amp. fuse and it still comes on.The fuse appears good ,what puzzles me is the fridge control panel and interior fridge lights all work with the neon fuse...

Same situation on 751 keys being common to rv's.

When I was running Cummins diesels in my dodges I used it all the time.I would go to a Cummins outlet and they had packages of oil, and all the filters in one set up.It made it simple to buy.I have not used it since,I now use mobile 1 syn. in my 6.0 chev.Is one better then the other probably...

Simply extend it to where you can reach it,leave original valve open,new one closed.

NONE of them cover any kind of structural problems.Get extended appliance coverage and be vigilant about your maintenance.Big big sales % for selling dealers.

What dry weight of 1106 lbs. are you referring too??Hitch??You will find that your limitations will be the load carrying capacity of the truck.

We live in Lanigan and are very happy to have South 20 as our dealer,bought 2 units from them.We presently have a Country Ridge extended stay parked on a seasonal site,no more heavy duty pulling,did that for too many years.

If you flush with the valve closed all you are doing is filling the tank,you can do that from the inside with the toilet.The best way is to make sure the tank is at least 3/4 full and have the flush hose on then pull the valve creating a strong flushing action,leave the flush hose run until...

No service work as the quality was too good??

Are they the correct application?How do they recover from deep discharge cycles,what is the duty cycle,ampacity compared to 6 volts golf cart type batteries,is the built in charger capable of correct charging cycles versus a wet cell.

Check the build date of the 7 year old tires,bet you get a real surprise.Replace them all.

I find it very disturbing that the dealer being prompt,up front and honest is questioned.I think the dealer had a reason not to go ahead with the deal and I doubt very much that it was a poor service department,you don't survive that many years by doing bad business.

That would sure do it if there is enough blade clearance with the ceiling.Thank You very much.

Ray you maybe right,I went and looked again yesterday and the short blades Heartland talks about would need to be only 8" long in order not to hit the slide.By pushing the blades up enough to slide on the slide molding is going to do 2 things,rub the long fans blades and the slide moldings,I...

The fan is mounted with no shaft length and as such is pretty much solid and unmoveable as far as tipping to the side or shortening.The fan is mounted into a cavity on the ceiling which looks like a vent would have been installed on a ordinary ceiling.The ceilings are so high that putting a...

Just spoke to Heartland and they acknowledge that is the way things are.My choice is to live with it and remember to some how lift the blades during the slide being closed or get smaller blades which they say won't look as good or be as effective in air movement.Lifting the blades now makes it a...

Reread my post,nothing was loose or hanging down,there is no clearance.The ceiling is so high that you need a stool to hold the blades up so the slide will not catch going in or out.We are not in the habit of leaving our slides out when we are not in attendance so it is a poor design and should...

We have a Trail Runner Mdl.40FKDS being prepped at the dealer and upon our last visit yesterday to measure the TV compartment we discover the over head fan in the living room area has a blade broken off.The reason is that the slide hits the fan when pulled in,resulting in a broken fan.The dealer...

How about fish?Fish eggs and dead fish.OOps not an animal.

I always ask the question about the dirtier it gets the better it is,how do you know the point of being the best it can be?If dirtier is better why don't they sell a package of dirt with the filter so it be better right away?So when they get dirty they close up the openings catching more dirt,in...

The dealer didn't help out with a tire and rim switch did he???

What does the switch control?

Had reese for years always up graded to newest model and sizes,then dealer put me onto an Equalizer and it is the best I have had,will never change back.Pay very close attention to slide mechanism and floor.

Thank you,so much to learn,so much to understand.

Please help me understand why an exposed weapon would not be better then a hidden weapon.If I saw an exposed weapon it would certainly deter me over a person not showing?And I did love the comment Canadians don't carry because we can camp between our American friends.LOL.,except if you have a...

Sorry the cobb.

We have one and it is kind of interesting to use,need to do more,not very impressed with the burgers or steak,but as I said need more practise.SIL uses his at the lake,they load up and head out to find a remore beach fire it up and go boating,come back for lunch all hot and tasty.They do...

Why don't you hire an rv technician there to accompany you,and make the correct changes,then hire an electrician to do the rest of the changes so it is correct and insurance doesn't become a problem.

Have you considered using portable generators running on gas or diesel from Canada or the USA,seems to me it would be a lot simpler then starting to change outlets,etc.

We have always seen the unit we purchased and kept looking untill we found one to look at that we liked.We were never brave enough to order,then see it and not like it.I am not sure but think that we got good buys off the lots over ordering.

I also have tried most things with little success.I use the clear fittings and elbow to moniter the clarity and flow,my wife came around the unit one day as I was watching and asked what I was doing--I replied watching my life pass before my eyes!!Honest it has been a good and FULLFILLING one.LOL>

My point exactly.

Who used the most urea?

LOL. rolling home--Yes my old body is not as agile as I would like,a remote sounds good,maybe Dimplex makes an optional remote control.Just to make everyone feel better outside my window is a snow storm.My extended stay trailer is resting at the dealers untill spring.

Jim there is always a reason for things,makes good sense to me I will wait a week or 2 for things to settle down and phone Brian Lynn.Thanks again everyone.The fellow who really knows the product at our dealership is on an extended holiday from sales up here in the cold cold north so the lack of...

Thanks everyone for the help and suggestions as the factory must be too busy to answer. It would just be nice to get their advice as I have more questions also, well all in good time.

That dimplex number doesn't seem to do it.