Search results

Thank you for your response. I’m going to order one tonight. I’m going to try and use silicone for the time being. Just need to get through the long weekend. once again, thank you for your fast response.

I know this thread is old, however I noticed my toilet weeping between the bowl & base. We’re you able to locate the seal or did you purchase a new toilet? TIA

I haven't had the time to check in the underbelly. I was going und er there next week to run some 12v wires for some LED lights I'm hooking up. I'm going to check the lines and I will check the connection on the tanks. Thanks for the heads up. I didn't think of that. I figured a line may have...

I have read several of the post on pump issues. I replaced my SHURFLO 12V 2.8 GPM because it wasn't pulling water from the water tanks. Now, i installed the aforementioned pump and this pump is pushing water, but with air. So, possibly the other pump may not have had an issue after all. I didn't...

I have a 2011 Road Warrior. The material from the couch is starting to peel from the heat and humidity. I was told by a Heartland Rep. that I needed to get the information from a sticker that was placed under one of the cushions. I have not been able to locate it think it was never put on or...

I like them Honey Glazed or shishcobobs. Sent from my SM-T700 using Tapatalk

Because of $$$$$$

Ok, I'm having the same issue. It now occurring with the slides & the landing gear. I will check later & see which one it is. Thank you

Ok. I will try it when it starts to pulsating. Thanks for the info

"Rap" please explain this procedure. Rap to me means hit it with something to dislodge. Not sure if that's what you mean by "Rap". Please advise Thank you

I had a similar issue back in may of this year. Several dents & scratches on the non-door side. The service manager got upset because I called him on the damage. I then pulled my phone out with time & date stamped photos. It was solved right there. Now I do the same, if I have to return to the...

But would that solenoid cause the surging? I can see how the ethanol deteriorates fuel lines & cause main or idle jets to get clogged. But it runs awsome under load. So I'm a bit stumped by it.

Trying to figure this issue out. Genny when idling surges and fluctuates. No issues under load, doesn't surge. I'm running non-ethenol regular fuel. Any help would be appreciated . Thanks in advance.

That's one of the reason's I upgraded to the G114s . I've had good results from Goodyear over the past. And yes, I am one of the blowout, with extensive damage, members on this forum

Thanks for the reply. As soon as i return home, i will check all of the above & repost. Sorry for both posts but wasnt sure where it was best to post. Once again thank you.

In short: I had the A/C running, a couple of lights on, and I started to bring in the slides. Once the last slide closed, i still had the switched pressed for a micro second, at which time, the rig lost power. My A/C shut off and once the slide switch was released, power came back on. I pressed...

I will always tow with a Dually. Simply put, my family deserves a safe trip as well as those families on the road.

So far so good for me. But as usual these rolling houses are subjected to many bounces and road jarring. So I know this will be temp fix, until it starts leaking again. Looking at trading it in next year for another RW or maybe a Cyclone. Sent from my GT-P5113 using Tapatalk

Aren't those from China also? Sent from my GT-P5113 using Tapatalk

Re: SOLVED 2008 Diesel 2500 HD starting problem Lynn1130 If you were in Florida I would help you to rebuils it. Its fairly simple. Unfortunately I dont know where you reside and im in Spain right now. I would look on line and purchase one from ATP Trucks or Alligator Performance. They are...

Re: Account Thanks BigJim , i was having issues here in Europe with Imternet Explorer. I used Firefox and was able to pay for it. Julie helped me out. But thanks a bundle. Sent from my SAMSUNG-SGH-I747 using Tapatalk

That was classic.

Re: SOLVED 2008 Diesel 2500 HD starting problem You are absolutely correct. Those O-rings stretch out a bit and let air get into the system. Diesel motors do not like air, they like plenty of fuel and high burning turbo. But, yes there are no other parts in there other than those O-rings.

Got one, never used it. I call Good Sam. Dont need to fight the racing cars on the highway Sent from my GT-P5113 using Tapatalk

Re: SOLVED 2008 Diesel 2500 HD starting problem Have you ever rebuilt your filter head? If you I stalled the Nicktane, you should have replaced all O-rings on that bad boy. The bleeder screw, as many have mentioned should have been replaced with an aluminum one & new O-ring. If you are having...

Please advise where I need to go to pay for my account. I can't seem to find it. Thank you Ivan Sent from my GT-P5113 using Tapatalk

This where the shower pan came apart. Sent from my GT-P5113 using Tapatalk

I had my shower pan replaced while on M/L. The material on the bottom of the shower pan de-laminated or the fiberglass used for support came un-glued. Once again i'm traveling outside the continental US on M/L. I will try & get Heartland to help out. The rig is out of warranty but it doesn't...

Unfortunately for me between my job & military i cant start any big projects. I have to farm it out. But i will be picking my rig up on wednesday or thursday and then i will post pics & manufacturer info. I hope it helps. Sent from my SAMSUNG-SGH-I747 using Tapatalk

I would call HL & see who their distributor is & contact them durectly. Yes labor alone is approx $650. Sent from my SAMSUNG-SGH-I747 using Tapatalk

Im still out of the country on M/L. But my rig is done, according to my wife. They saved the shower pan for me to inspect and attempt to get the company to reimburse me. Either way I will post pictures for review. Sent from my GT-P5113 using Tapatalk

JohnD, thats insane. Think about it, the drain pipe doesn't flex. Sent from my SAMSUNG-SGH-I747 using Tapatalk

Problem solved. 1) placed a piece of alluminum like porthole said 2) fixed a leak on the pipe that goes to the black tank for flushing. Now no more dampness or mold. I guess it takes a lot of head banging and cursing to get the wheels turning. The sailor in me came out & wala. Sent from my...

Well update on the shower pan. Still unsure why it got mushy on one side but my extended warranty refused to pay for repair. So it comes out my pocket for now. They claim its part of the floor & they dont cover floor damage or issues. I'll deal with that problem later. Sent from my GT-P5113...

Gentlemen, we can argue about whats best and whats not. But one has to remember, a bargain isn't always a bargain. I agree with jim allison on not purchasing upgraded equipment at an inflated price. I too purchased that road hazard for the tires and let me say something about that. I may get...

They make a great swing, ask my girls. LOL 17.5" rims wrapped with Goodtear G114. Sent from my SAMSUNG-SGH-I747 using Tapatalk

Just replace your tires with quality brand tires. Been there done that & have scars to prove it. After my experience all of my friends have dumped the less quality tires for Goodyear, Maxxis, michellin Ribs. Im not advocating a specific manufactur but common sence on quality. My 2 cents. Sent...

Thats awsome. Sent from my SAMSUNG-SGH-I747 using Tapatalk

My toyhauler is a bit longer at apprx. 38' . I have numerous mods on my truck all the way to EFI Live with a custom 100 hp tow tune w/exhaust brake. I just avg. 11.5 mpgs to Maggie Valley, NC. at 65 mph. Sent from my GT-P5113 using Tapatalk

17.5" rims with Goodyear G114 thats the solution. I've posted about this before & won't waste anyone elses time. If you dont change tires after readi g a thousand one post on this subject, then I hope you have plenty of patience & no where to go. Merry Christmas Sent from my GT-P5113 using Tapatalk