Search results

Hey , thanks wheres the control board located ? im willing to give it a shot

Hey All ! thought id reach out for some info or help here. So my unit ran out of hot water a couple weeks ago & i switched over to propane & I've been running propane since. I thought it might be the element , so i swapped it out but still nothing . i checked the breaker , shut it off , then...

Hey all ! wondering if anyone has the correct part number for the hot water tank element for a 2009 cyclone 3950 ? mine seemed to pack it in... I'm guessing the tank needs to be drained in order to change it out ? any other tricks or things a guy should know before starting this ? Thanks

Hey all . I hope this is the right spot fro this , i apologize if its not. I have a 2009 Cyclone 3950. So i just bought a small 3.5 cubic foot deep freeze & put it in the garage & plugged it into the outlet on the driver side on the roof. This is when i started to experience the problem. My...

hello so ive been reading a few different threads but nothing seems to be what im looking for....i have a 2009 cyclone 3950 & the largest slide on the door side of the trailer creeps out only when driving....its not the whole slide , its only the back side(the passive side without the hydraulic...

So I did an oil change along with filter & I notice it still leaks...very tough to tell where it's coming from , I did check the filter & the drain plug , both are tight.....

Thanks cookie for you helpfullness ok , so an update for anyone who might be having this same issue/problem. now theres probably more ways to do this but what i did after following the manual for the adjustments & i still wasn't achieving what i wanted , i started sucking back some brewskies ...

so i read the manual for the lippert hydraulic through frame slide out on the adjustments & all , i got my "passive side" pushed in to the max on its adjustment slots & its still not closing like the "active side" its almost like it jumped a couple teeth on the sproket....is that possible ?

hey!!!thats right on!! thanks !!! just what i needed

hey , just wondering if anyone can provide some info to help me adjust my slide on my 2009 3950. its the one on the passenger side....right beside the entrance door. its 9 feet , i was just under there looking & it has 2 gear arms that it rides on & one hydraulic ram that moves it. the side to...

yes,i never did check the filter & drain plug ,i will definatley do that , i am going to change the oil & filter next week ,so when i do , i will pay attention to those areas....it for sure is not coming from the valve covers or anything high.....so hopefully that will fix it thanks

hey , i know this is pretty vague , just wondering if there are some things i can do or check , maybe someone else had this happen....i got a 2009 3950 & the on board onan has about 500 hrs on it....it runs great but leaks a lot or oil... very tough to see where its coming from with the thing...

hey , just wondering if anyone out there has bought or knows where i can find info on buying a storage cover for my 2009 3950. there are covers out there but the ones i have found so far are just generic & made for any trailer thanks for any info

hey , thanks the whining was the pump motor spinning , once it would pressure up , it would make a higher pitched sound as fluid would pressurize i would suspect ? as for the batteries , there good , checked & charged them , even hooked up the truck to the plug , which charges the batteries as...

ok , so i have a Heartland 395 & the previous owner installed a set of hydraulic jacks (from princess auto i think) up front to assist the crappy under powered electric jacks that came with the thing. The last couple trips last summer , the pump would wine but not pressure up , i would flick...

i have a 09 cyclone 3950 & the previous owner installed them & when they work , they work great !! but when they dont , its a real pain in the arse & not being familiar with hydraulics , right now , i have a real pain in the arse ! but over all , alot easier & better than the S@&TY one that it...