I believe the axel on my 3210 Cyclone is out of alinment

[ultrafarmer]

I have had to rotate the right rear tire 2 times now. So I was under there looking at it and looks like it might be welded on a little wrong. Tire is wearing on the outside, so I put on spare and made it home, what to do now.

 

[cookie]

I would look for an allignment shop in your area. One that does big trucks and trailers.
I had mine done for around $175. Took them just a few hours.
If you are wearing on the outside, it could be allignment or camber.

Peace
Dave

 

[GOTTOYS]

Do as Cookie suggested. Bring it to a big truck, bus alignment shop. Don't mess with swapping axles or any of that. They will get it fixed up in an hour or two. Even when brand new I doubt the alignment is where it should be. There are several adjustments that even the highly touted Correct Track won't take of. A proper alignment covers all the specs and it's the only way to everything right. I had mine done this Spring and plan to bring it back annually. At $1300. plus for a set of tires why not?...Don