Hi ! My 2010 3912 Toy hauler doesn't have a 110 plug on the door side slide out and it would be very nice to have one there ! So has any one added a plug there and how did you do it ?
Thanks
chaseb
Look up optimum car wax ! this stuff claims to have a uv thing in it and it goes on and dry's clear so you can towel it off or leave it alone ! My 2010 Cyclone still looks new and the optimum is all i've used on it ! I did try the Rejex on the front and the bugs still we're hard to get off !
chaseb
Could someone please tell me the purpose of the regulator on the left side tank ? There is already a regulator where this tank feed's into the auto switch regulator on the right side ? A guy at the RV place said he sure didn't see the need for 2 of them ! Thanks ahead of time !
chaseb
The DW was putting the slides out the other day and for the first i saw where the bottom of the slide came out about 3 inchs before the top began moving out ! Is any one elses doing this or is something wrong with mine ?
chaseb
I totally totally disagree with any one saying that HL can't be responsible for what they put in a very expensive RV ! HL put it in there and are absolutely responsible for it !
chaseb
This turns out to be another "Heartland strikes again quality issue" ! I jacked the slide up about an inch to see what i could see and lo and behold they failed to put 2 screws in the bracket ! One screw on one end and that made the roller bracket tilt so the ends we're against the slide bottom...
Hi All ! The other day while camping i was under the bed room slide and saw a gouge in the bottom of the slide out ! From what i could barely see there appears to be a tab of some kind on the end of the roller ! I haven't figured out yet how to get to the thing and see if i can move it ! Has any...
Look under the sink for a pipe that appears to go nowhere ! On the top of that pipe is a vent ! Maybe it's not venting ! Might put a baggie over iy for a little while and see if the smell goes away ?
chaseb
I've posted this before but here goes again ! When you get the Cycloe home stand back and look at the ramp door like it's a picture with the fiberglass as the picture and the outer metal as the picture frame ! What you need to do is get some silicone and put it where the metal and fiberglass...
Only thing i know for sure is that you have to keep fuel stabilizer in the tank or you will have problems ! Todays gas is pretty sorry if not treated !
chaseb
I have a 1 ton chevy dually and have all the truck i need for my fifth wheel but i do wonder if adding air bags would help smooth out the rough roads we travel ?
chaseb
The problem with these tires is right here with people excusing HL because other manufacturers are using the same tires ! These tires aren't the problem it's HL's fault for putting them on in the first place ! Don't think for a minute that HL don't know these tires are NO good ! But as long as...
Take the 2 gears out and rub the flat side of gear on fine sandpaper ! It won't hurt anything and don't cost a cent to try it ! I did mine several years ago and their still working
chaseb
The only thing i use the pressure washer for is the tire's ! There's too many places for high pressure water to get where you don't want it ! JMHO !
chaseb
Considering that i have a toy hauler and only one Harley i went to the appliance store and bought the cheapest washer & dryer i could find and put them in the garage and fixe up some quick connects for the water line and drain and then i just run the dryer vent out the screen door opening ! The...
I took the gears out of mine and rubbed the flat sides on some fine sandpaper and put it back together and it has worked ever since ! Easy fix !!!
chaseb
The last couple days i have been adjusting the brakes on my 2010 Cyclone ! I did the left 3 axle's first because that side was in the shade so that seemed like a good way to go ! Anyway i wound up taking the hub's off all 3 axles because the adjusters we're rusted solid and i had to remove them...
The first thing you have to do is make sure you have 12 volt right at the pump ! If you do then you might have to get the 2 gears out and rub them over some fine sand paper ! They claim that the gears seem to swell up and rub against the housing ???? I did this to mine and afterward it worked...
Hi All ! Just wondering if anyone has purchased the small single step ladder hanger that attache's to the roof top and then you hang the ladder off it ? I might have to buy one and was wondering what the little thing might cost ! Seem's like the one up there is awfully loose ! Don't know if it's...
I think there's 2 little studs at the motor housing that you can apply 12 volt directly to make it work ! See if you can see them and if so have a try with that !
chaseb
Re: What if?
Your not going to buy a GM truck with a long bed any more ! The only way to get a long bed is with a regular cab ! They have even changed the name's of the truck's ! No more crew cab or extended cab ! They have another name now !
chaseb
I don't know how the red ring come's off because that's where i stopped ! I didn't know how to get it off ! I'm not at home so i didn't want to mess around and break it ! By the way it's a double handle !
chaseb
I have a 2010 Cyclone 3912 and the faucet's in the bathroom are getting irritating with the squeaking noise ! I took the handle's off but couldn't figure out how to get them apart any farther ! There was a red ring on top of the threads and i didn't know how to get that off so i stopped right...
I didn't like the way the ramp door on my 3912 Cyclone went down so far so i built an extension that is 12 inch's high and 36 inch's long and about 24 inch's wide and the ramp sets on top of it so i don't have the door so low down !
chaseb
This site uses cookies to help personalise content, tailor your experience and to keep you logged in if you register.
By continuing to use this site, you are consenting to our use of cookies.